Dongguan Chenyi Electronics Co., Ltd.
Dongguan Chenyi Electronics Co., Ltd.
Gold Verified Supplier
1Yr
Verified Business License Business License
Main Products: Real-time spectrum analyzer & monitoring receiver, Vector Signal Generator, Scalar network analyzer, RF recorder
Home > Blog > rohde schwarz RS SMW200A vector signal generator SMW-B1020: 100 kHz to 20 GHz

Contact Us

Ms. JIANG
Chat Now

Your inquiry content must be between 10 to 5000 characters

Please enter Your valid email address

Please enter a correct verification code.

rohde schwarz RS SMW200A vector signal generator SMW-B1020: 100 kHz to 20 GHz

rohde schwarz RS SMW200A vector signal generator SMW-B1020: 100 kHz to 20 GHz




The fine art of signal generation



Key Features


▶ Vector Signal Generator SMW-B1020: 100 kHz to 20 GHz

▶ Capable of outputting signals up to 67 GHz

▶ Configurable with 2 RF outputs (up to 44 GHz)

▶ Internal RF modulation bandwidth, maximum 4 GHz (dual-channel configuration)

▶ Can generate 5G signal waveforms

▶ Excellent modulation quality (0.4 dB flatness for 2 GHz bandwidth)




Key facts

Frequency range up to 67 GHz (dual path: up to 44 GHz)

2 GHz modulation bandwidth  

Integrated fading with up to 800 MHz bandwidth and up to 8x8 MIMO  

Excellent signal quality for high accuracy in spectral and modulation measurements

Advanced GNSS and radar simulator。


Top performance and unrivaled flexibility

Performance and functionality requirements vary depending on test setup and application. The R&S®SMW200A is unrivaled in mastering  these varied requirements and sets new standards for signal generators. When developing and verifying any type of DUT, including components, modules and complete base stations – the R&S®SMW200A easily generates the appropriate test signals with top performance. The R&S®SMW200A has a flexible modular design that can be equipped with exactly options that applications require. Any configuration is possible, from a classic single-path vector signal generator to a multichannel MIMO receiver tester.



Features & benefits

Vector signal generator up to 67 GHz

The R&SeSIW200A covers the frequency range up to 67 GHz as a single-path instrument and up to 44GHz

as a dual-path instrument. lt can also be equipped with a maximum of two internal basebandmodules and 

four fading simulator modules. This concept yields two full-featured vector signalgenerators in a single unit, enabling easy generation of complex signal scenarios.


0utstanding phase-noise performance

The standard high-end synthesizer in the R&SeSMW200A provides exceptional SSB phase-noise andnonharmonic performance. Several low phase-noise options are available to further improveperformance.The R&SeSMW-B711/B721 ultra-low phase-noise options enable best-in-class phase-noiseperformance.The R&SeSMW200A is perfect for measurements that demand spectral purity.


GHz bandwidth with excellent modulation characteristics

The wideband l/0 modulator with up to 2 GHz RF bandwidth covers all applications in its frequencyrange, including wireless communications, satellite communications and radar. The internal basebandcan generate signals with a maximum 2 GHz RF modulation bandwidth.State-of-the-art D/A converters and excellent RF chain desian ensure exceptional modulation freauencyresponse of <0.4 dB over 2 GHz bandwidth with excellent EV performance. The R&SeSMW200Agenerates 5G NR signals (100 Hz channel bandwidth, 64QAM, 3.4 GHz carrier frequency) with anEVM of 0.1% (meas.), or WLAN IEEE802.11be signals (320 MHz, 7 GHz carrier frequency) with an EVMof -53 dB (meas.).


MlMO and integrated fading on board

The R&SeSMW200A offers integrated channel emulation for up to 800 MHz of fading bandwidthFading profiles for all major standards are available as presets. With up to 64 fading channels, all kevMlMO fading scenarios such as 2x2,3x3, 4x4,8x4,4x8 and 8x8 can be configured in a singleinstrument. Aggregation of up to eight carriers is also supported and SGT100A signal generatormodules can be connected to provide up to eight RF paths.


Unique usability features

The built-in R&SeSMW200A graphics function displays generated signals in real time. The user canselect the type of display, e.g. l/Q vs. time, frequency spectrum, vector diagram or CCDF TheR&SeSMW200A also offers a SCPl macro recorder with code generator, which records all manualoperating steps to generate a file with a remote command sequence. Integrated code templates areprovided for directly generating executable code for MATLAB®, CVl or Python.


Applications

Wireless communications standards

IReal-time envelope tracking

IGNSS simulation

Radar simulation







Share

Contact Us

Send Inquiry to Us
* Message
0/5000

Want the best price? Post an RFQ now!

Recommended Products