Dongguan Chenyi Electronics Co., Ltd.
Dongguan Chenyi Electronics Co., Ltd.
Gold Verified Supplier
1Yr
Verified Business License Business License
Main Products: Real-time spectrum analyzer & monitoring receiver, Vector Signal Generator, Scalar network analyzer, RF recorder
Home > Blog > rohde schwarz FSWP50 Phase noise analyzer and VCO tester,1 MHz to 50 GHz

Contact Us

Ms. JIANG
Chat Now

Your inquiry content must be between 10 to 5000 characters

Please enter Your valid email address

Please enter a correct verification code.

rohde schwarz FSWP50 Phase noise analyzer and VCO tester,1 MHz to 50 GHz

rohde  schwarz  FSWP50 Phase noise analyzer and VCO tester,1 MHz  to  50 GHz



Key Features


▶ Combination of R&S®FS-Z series mixers enables phase noise measurement above 50 GHz

▶ Frequency range: 1 MHz ~ 50 GHz

▶ Achieves ultra-high sensitivity phase noise measurement: 

   -172 dBc/Hz (typical value, 1 GHz, 10 kHz offset)

   -153 dBc/Hz (typical value, 10 GHz, 10 kHz offset)

▶ Single unit supports full-featured spectrum analyzer

▶ Can simultaneously evaluate phase noise and amplitude noise

▶ Phase noise of pulse signals can be measured with one button

▶ Residual phase noise of two-port devices can also be measured with one button




Key facts

Cross correlation for very sensitive measurements of amplitude and phase noise in parallel, even on pulsed signals

Frequency range from 1 MHz up to 56 GHz, 325 GHz with external mixers

Internal source for measuring residual phase noise up to 54 GHz, even on pulsed signals

Support of external LO inputs for absolute or residual phase noise measurement up to 56 GHz

SCPI recorder to simplify code generation



Unrivaled low phase noise

The R&S®FSWP phase noise analyzer and VCO tester is very sensitive thanks to extremely low-noise internal sources and cross-correlation. It can measure phase noise and amplitude noise in mere seconds on highly stable sources such as those in radar applications. Additional options such as pulsed signal measurements, residual phase noise (including pulsed) characterization and integrated high‑end signal and spectrum analysis make the R&S®FSWP a unique test instrument.




Available models


Models:R&S®FSWP8            Order number 1322.8003.09

Frequency range:1 MHz - 8 GHz  

Phase noise:<–166 dBc (1 Hz)  (f = 1 GHz, 10 kHz offset)

Max. analysis bandwidth:320 MHz

Instrument type:Phase noise analyzer and VCO tester



Models:R&S®FSWP26       Order number 1322.8003.27

Frequency range:1 MHz - 26.5 GHz

Phase noise: <–166 dBc (1 Hz)   (f = 1 GHz, 10 kHz offset)

Max. analysis bandwidth:320 MHz

Instrument type:Phase noise analyzer and VCO tester



Models:R&S®FSWP50      Order number 1322.8003.51

Frequency range:1 MHz - 50 GHz

Phase noise:  <–166 dBc (1 Hz)    (f = 1 GHz, 10 kHz offset)

Max. analysis bandwidth:320 MHz

Instrument type:Phase noise analyzer and VCO tester



Share

Contact Us

Send Inquiry to Us
* Message
0/5000

Want the best price? Post an RFQ now!

Recommended Products