Ceyear 4025A Handheld Spectrum Analyzer，9kHz to 6GHz

Ceyear 4025A Handheld Spectrum Analyzer，9kHz  to  6GHz

Handheld Spectrum Analyzer 4025A :  9kHz  to  6GHz 

Handheld Spectrum Analyzer 4025B :  9kHz   to  9GHz 

Handheld Spectrum Analyzer 4025D :  9kHz  to  20GHz 

Handheld Spectrum Analyzer 4025E :   9kHz  to  26.5GHz 

Handheld Spectrum Analyzer 4025G :  9kHz  to  44GHz 

Handheld Spectrum Analyzer 4025K :  9kHz  to  54GHz

Main Features

▶Frequency range: 9kHz～20GHz, low frequency can be extended to 5kHz, standard full-bandpre-amplifier is included

▶Displayed average noise level: -165dBm/Hz (2MHz～2GHz, pre-amplifier on, typical value)

▶Single-sideband phase noise: ≤-113dBc/Hz @ 100kHz offset @ 1GHz carrier (typical value)

                                                          -108dBc/Hz @ 100kHz offset @ 10GHz carrier (typical value)

▶Fast scan speed: Scan time <33ms (scan width 20GHz, resolution bandwidth 3MHz)

    Scan time <4s (scan width 1GHz, resolution bandwidth 1kHz, fast FFT scan mode)

▶Multiple measurement function modes: Spectrum analysis, interference analysis (waterfall chart, RSSI),         

    channel scanning, field strength measurement, USB continuous wave power measurement, USB peak power   

    measurement, analog demodulation analysis (AM, FM, PM), directional analysis, 40MHz bandwidth real-time    

    spectrum analysis (supporting digital persistence spectrum and waterfall chart display), etc.

Product Overview

The Ceyear 4025 spectrum analyzer is a new generation of high-performance handheld spectrum analyzer, with a frequency measurement range of 9kHz to 54GHz, mainly used for installation and commissioning of wireless communication equipment in the field, maintenance and interference detection, etc. It is small, lightweight, highly adaptable to the environment, flexible in power supply and easy to operate.

4025 spectrum analyzer has many function modes such as Real-time Spectrum Analyzer，Interference Analyzer, Channel Scanner, Field Strength Measurement, USB CW and Peak Power Measurement, AM/FM/PM Analyzer, Location Analyzer, it also has the function of Channel Power, Occupied Bandwidth, Adjacent Channel Power, Spectrum Emission Mask, Carrier-to-Noise Ratio, Harmonic Distortion, Spurious Emission Mask, Indoor/Outdoor Map Coverage and other intelligent measurement. The spectrum analyzer supports LAN, USB, Micro SD card, Wi-Fi wireless communication and other interfaces. The instrument adopts a 10.1-inch capacitive touch screen, which supports marker dragging, frequency and amplitude parameters dragging and scaling, etc. The product can be applied to mobile communication, satellite communication, radar detection, microwave communication, on-site debugging and installation and maintenance of electronic reconnaissance and countermeasure equipment, interference source direction finding and map positioning, transient time-varying signal testing, etc.

Features

Frequency range coverage: 9 kHz to 54 GHz, low frequency can be extended to 5 kHz, full-band pre-amplifier are configuredRF performance specifications:

DANL: ≤-165dBm/Hz(2MHz~2GHz, Pre-amplifier on, Typ. for 4025A/B/D Model)

            ≤-163dBm/Hz(2MHz~2GHz, Pre-amplifier on, Typ. for 4025E/G/K Model)

SSB Phase Noise: ≤-113dBc/Hz@100kHz offset@1GHz carrier(Typ.)

                                ≤-108dBc/Hz@100kHz offset@10GHz carrier(Typ.)

TOI: +16dBm@900MHz(Typ.)

Total Amplitude Uncertainty: ±1.0dB(Typ.)

Fast Sweep Speed

Sweep time<33ms (20 GHz span, 3 MHz RBW)

Sweep time<4s (1 GHz span, 1 kHz RBW, Fast FFT sweep mode)

Multiple measurement function modes

Spectrum Analyzer, Interference Analyzer (Spectrogram, RSSI), Channel Scanner, Field Strength Measurement, USB CW Power Measurement, USB Peak Power Measurement, AM/FM/PM Analyzer, Location Analyzer, Real-time Spectrum Analyzer (supporting DPX and Spectrogram display), 2G/4G/5G Demodulation Analysis, IQ analyzer, Time Gate Scanning etc.

Various intelligent measurement functions

Channel Power, Occupied Bandwidth, Adjacent Channel Power, Spectrum Emission Mask, Carrier-to-Noise Ratio, Harmonic Distortion, Spurious Emission Mask, Indoor/Outdoor Map, Gated Sweep, etc. Support GPS/Beidou positioning and frequency disciplined function for the crystal in the instrument, the typical frequency reference accuracy after GPS locking calibration can reach ±10ppb.

Multiple types of auxiliary test interfaces and digital interfaces

10MHz Reference Input and Output, GPS/Beidou Antenna, Zero Span IF Output, Wi-Fi Wireless Communication Interface, LAN, USB, MicroSD, etc.

User-friendly operation experience:

10.1" LCD and capacitive touch screen with 6 independent markers, support for marker dragging, frequency/amplitude parameters dragging and scaling functions, support for signal tracking and peak tracking, 3 display traces, 6 detection methods (Normal, Peak, Negative Peak, Sample, Average, RMS).

Excellent field usability:

Strong environmental adaptability, working temperature -20℃ ~55℃ , storage temperature -50℃ ~70℃ ; light weight, the whole instrument including battery weighs about 3.5kg~3.8kg; supports three vision styles: Default, Black & White, Night Vision; built-in large-capacity lithium-ion battery, typical operating time up to 3~4 hours.

Multiple types of optional field test accessories can be configured

Such as USB CW Power Sensors, USB Peak Power Sensors, omnidirectional antennas, directional antennas, USB electronic compasses, EMI near-field probes, car chargers, Smart Battery Charging Base, etc.

Spectrum Analyzer Mode

The Spectrum Analyzer function of the 4025 spectrum analyzer is equipped with Channel Power, Occupied Bandwidth, Adjacent Channel Power, Spectrum Emission Mask, Carrier-to-Noise Ratio, Audio Demodulation, Harmonic Distortion, Spectrum Emission Mask, Multi-Carrier Adjacent Channel Power and other test functions as standard, featuring high test sensitivity, fast sweeping speed, large dynamic range and good phase noise performance. 4025 spectrum analyzer has a variety of built-in predefined signal standards that can be called up directly, supports noise marker and frequency counter functions, can display 3 traces simultaneously, and has different detection methods such as Normal, Peak, Negative Peak, Sample, Average, RMS, and supports signal tracking and peak tracking functions.

Interference Analyzer Mode (Option)

The Interference Analyzer option features spectrum measurement, Spectrogram and RSSI measurement. The Spectrogram uses a three-dimensional display of frequency-amplitude-time, making it easy to observe periodic or intermittent signals. The different colors in the Spectrogram show the strength of the signal amplitude, RSSI is mainly used to measure the power change of a point frequency signal in a time period, both Spectrogram and RSSI measurement support the automatic storage function of the signal.

Channel Scanner Mode (Option)

The Channel Scanner Mode provides the measurement of the signal power of multiple channels. The signal power is displayed as a bar graph or as a table, and the signal power of up to 20 channels can be measured. There are three measurement modes depending on how the channels are set up: channel scanner, frequency scanner and list scanner, all of which allow the bandwidth and number of channels to be set.

AM/FM/PM Analyzer Mode (Option)

The AM/FM/PM Analyzer mode provides the display of AM, FM and PM modulation signal profiles and the analysis of the associated parameters. The main plots and related parameters are measured as shown below.

RF spectrum: similar to the spectrum analyzer mode, the spectrum plot of the modulated Signal is displayed and the occupied bandwidth can be measured.

Audio Spectrum: displays the spectrum of the demodulated audio signal.

Audio Waveform: displays the waveform of the demodulated audio signal in the time domain.

Parameter analysis function: Carrier power, Demodulation rate, carrier frequency offset, modulation depth (AM), modulation frequency offset (FM), SINAD, modulation distortion, total harmonic distortion and other parameters of the modulated signal can be measured and analyzed.

USB CW Power Meter(Option)

The USB Power Meter can measure the CW signal power up to 40GHz with the external USB power sensor of 87230/87231/84232/87233 series.

Typical Application

Field comprehensive performance evaluation of electronic equipment

The 4025 spectrum analyzer has multiple advantages such as high-performance, fast sweeping speed, multiple test functions, easy operation, etc. With a handheld structure, small size, light weight, strong adaptability to the environment, and battery-powered, it can be applied to the field installation and commissioning of various electronic equipment such as radar, communications, electronic countermeasures and electronic reconnaissance, precision guidance and maintenance.

Field testing and diagnosis of transmitters and receivers

The 4025 spectrum analyzer has a variety of measurement function modes such as Spectrum Analyzer, Real-time Spectrum Analyzer, Interference Analyzer, AM/FM/PM Analyzer, Power Meter, Channel Scanner, Field Strength measurement, etc., and has a variety of intelligent measurement functions such as Channel Power, Occupied Bandwidth, Adjacent Channel Power Ratio, Carrier-to-Noise Ratio, Spurious Mask, Harmonic Distortion, etc., which can provide comprehensive spectrum analysis and diagnosis for field testing of transmitters and receivers. The new product is designed to provide comprehensive spectrum analysis and diagnostic services for transmitter and receiver field testing.

Broadband spectrum monitoring, interference identification

The 4025 spectrum analyzer can be used for electromagnetic environment detection, radio interference analysis, electromagnetic environment background assessment, spectrum monitoring and identification of illegal channel interference signals by means of external omnidirectional or directional antennas; it can be used for spectrum testing of complex signals such as time division multiple access signals and transient time-varying signals by means of Gated Sweep and Real-time Spectrum Analyzer.