Keysight N5171B EXG X-Series RF Analog Signal Generator N5171B-Option 503，9 kHz to 3 GHz

Keysight N5171B EXG X-Series RF Analog Signal Generator N5171B-Option 503，9 kHz to 3 GHz 

N5171B-Option 501：             9 kHz to 1 GHz 

N5171B-Option 503：             9 kHz to 3 GHz 

N5171B-Option 506：             9 kHz to 6 GHz 

N5171B-Option 506+FRQ：   9 kHz to 7.2 GHz 

N5171B 9 kHz to 3 GHz, and standard front panel connector configuration

Optimized for manufacturing with faster throughput and greater uptime at the right price

Highlights

Cost-Effective Signal Generator Optimized for Manufacturing Test

▶Achieve faster throughput and greater uptime

▶Perform basic parametric testing of components and functional verification of receivers with

   industry-leading output power

▶Thoroughly verify receiver performance by simulating complex analog modulation scenarios with

   multi-function generator capability

▶Minimize downtime and expenses with self-maintenance solutions and low-cost repairs

Maximize yield with outstanding hardware performance

▶Confidently test components with an excellent level of accuracy and repeatability

▶Compensate for test system losses with industry-leading output power

▶Maximize throughput with the fast switching speed

▶Shrink your test stand with two rack-unit height

▶Get the performance and capabilities you need today and easily upgrade later

Definitions and Conditions 

Specifications represent warranted performance of a calibrated instrument that has been stored for

a minimum of 2 hours within the operating temperature range of 0 to 55 °C, unless otherwise stated,

and after a 45 minute warm-up period. The specifications include measurement uncertainty. Data

represented in this document are specifications unless otherwise noted. 

Typical (typ) describes additional product performance information. It is performance beyond 

specifications that 80 percent of the units exhibit with a 90 percent confidence level at room 

temperature (approximately 25 °C). Typical performance does not include measurement uncertainty.  

Nominal (nom) values indicate the expect mean or average performance, or an attribute whose 

performance is by design, such as the 50 ohm connector. This data is not warranted and is measured 

at room temperature (approximately 25 °C). 

Measured (meas) describes an attribute measured during the design phase for purposes of communicating 

expected performance, such as amplitude drift vs. time. This data is not warranted and is measured at room 

temperature (approximately 25 °C). 

Options

Frequency Range

N5171B-501：  Frequency range, 9 kHz to 1 GHz

N5171B-503：  Frequency range, 9 kHz to 3 GHz

N5171B-506：  Frequency range, 9 kHz to 6 GHz

General Performance Features

N5171B-UNZ：  Fast frequency switching

N5171B-1EA：  High output power

N5171B-1ER：  Flexible reference input (1-50 MHz)

N5171B-SD0：  No internal non-volatile memory/solid state drive

N5171B-099：  Expanded license key upgradability

Connector Configuration

N5171B-UNM：  Standard front panel connector configuration  

N5171B-1EM ：  Move all connectors to rear panel

Analog Modulation

N5171B-UNT：    AM, FM, phase modulation

N5171B-303 ：    Multifunction generator

N5171B-UNW：  Narrow pulse modulation

Additional Features

N5171B-006：  Instrument security and removable memory card

Calibration Documentation

N5171B-UK6：  Commercial calibration certificate with test data

N5171B-A6J：  ANSI Z540-1-1994 Calibration

N5171B-AMG：  Calibration + Uncertainties + Guardbanding (Accredited)

Accessories

N5171B-AXT：  Hard transit case

N5171B-CVR：  Front panel cover

Software with Subscription

N5180302B：  Avionics VOR/ILS  

N5180320B：  Pulse train generator